The Trivecca Rebuildable Atomizer is the newest version of the Bulldog Rebuildable. The Trivecca can be dissassembled into three pieces and is made with chrome plated brass. This is only for the most experienced user as it requires a fair bit of technical aptitude and patience in re-winding the coil around the wick. Due to the nature of this product, there is no warranty on this item unless the unit (not including the coil preset in the bulldog) has manufacturing defects.
Package Includes the following:
1 – Trivecca Rebuildable Atomizer Unit
Can purchase an additional:
3 feet of 2.5 mm Silica Wick
3 feet of 32 gauge AWG Kanthal
The Trivecca Rebuildable Atomizer is NOT intended to be used on an eGo/eGo-C Twist battery.
Due to the nature of this product we are unable to provide any type of warranty and are not responsible for any damages to your e-cigarette device that may be sustained from improper use of this product.
Showing reviews 1-10 of 19 | Next
Posted by John M on 11th Apr 2013
My biggest thing I look for in vaping is Flavor, Ive tried several cartomizers, vivi novas, stardusts, and just never liked any of them since I started vaping by dripping on 510s and 306s...this atomizer gives me the best flavor of anything I have tried. my airhole lines up perfect, and gives good vapor and TH. With long wicks in here im dripping about 10 drops which is great. This is my first rebuildable and I couldn't be happier.
Posted by blake vaping for 2 years. on 26th Mar 2013
8.99$ for the trivecca. You really do get what you pay for. This was my first Rebuidable and it has left me very dissapointed. The connection is el-dook-ey-o-stain-o. Sometimes it won't fire, actually 85% of the time it wont fire, and that's on my Lavatube V2. When it does fire, i get a decent amount of vapor. Thats why i gave this 2 stars, it can produce a good amount of vapor when it works. I've wrapped many coils, 1.4ohm-2.8ohm. It works best at low ohms, which i believe all Rebuidables do. (depending on voltage). Anyway, the airhole wasn't big enough, I drilled a bigger air hole approximately 2mm thick, i think.
Anyway, it's a cool tool to learn with. But I suggest spending more money on a nicer atty because you get what you pay for.
Posted by Don Juan on 15th Mar 2013
This version 3 of the phoenix clone, if I am not mistaken was ok. That hole, as what others complained about really killed it (the hole was on the side). I wasn't also expecting that the screws were on the side not on top which makes the inside smaller in my opinion. For that hole, I had to sand it down to put that hole in the right place. OKC should have a quality control on these ones. I know that this is packed in plastic (since it's new), but maybe you can just do the sanding for the customers. ;) Overall, after doing all the work I had to do, this tiny machine just evolved to a mean machine!
Posted by cantw8 on 18th Feb 2013
the air hole kills it for me i can not get a good vape for this thing. it has laready been tossed in a box lol
Posted by Jason A. on 8th Feb 2013
this dripping atomizer works as it should. There is a bit of a learning curve (wrapping a small coil around brittle silica wick isn't the most fun a person can have) but its fairly straightforeward and simple...
Posted by C Lowder on 20th Jan 2013
This atty looks and works great. Easy to clean and maintain. Hits like a champ. I love it.
Posted by DeadGonzi on 11th Jan 2013
This thing is super easy to set up and take apart to clean and maintain. After cleaning it, the threads are super smooth and the airhole always alings on the oposite side of the screw heads, very predictable for coil location. I counldn't be hapier with my purchase, use it almost dailly at my desk when at work for dripping about 10 drops.
Posted by Tony C. on 2nd Jan 2013
Very solid build. Vapes real well and fairly simple to rewick. An RBA of this quality for under ten bucks is hard to beat!
Posted by Rich D. on 24th Dec 2012
After a few RBA trial and errors I was left less then pleased. Even my DiD wasnt working right, was about to give up on them all together, but decided to give this one a shot. Very glad I did as this hits like a heavy weight champ! currently running a 2.2 ohm coil at 6v's and no dryburns. Very happy and cant wait till more funds come in to try the AGA-T and a few other setups.
Posted by Unknown on 20th Nov 2012
Ordered on Friday, arrived on Monday. Atty came as described, ready to use. I did replace the o-ring in order to align air hole but knew this going in. I do not find the draw too tight. I talked to the "Mod Guy" and would suggest that you do the same to answer any questions before ordering. Ordered wick & wire and some ss mesh with atty.
Showing reviews 1-10 of 19 | Next