The IGO-L is all stainless steel, 510 connection, drip style atomizer. The air flow is from the side and a large inside chamber to allow for thicker wick combinations.
Due to the ease of use of the larger chamber, the posts are raised with philip head screws. You can choose between 1, 1.5, 2.5 & 3 MM wick with Kanthal wire AWG 28, 30, 32 & 36 to achieve the desired ohms.
Due to the nature of this product we are unable to provide any type of warranty and are not responsible for any damages to your e-cigarette device that may be sustained from improper use of this product.
All Sales Are Final
RBAs are strictly use at your own risk products.
If there are obvious manufacturer’s defects, please contact us within 24 hours upon receipt of your order.
We will determine the issue and if necessary exchange a new RBA of the same type. RBA cannot be exchanged for another product.
Showing reviews 1-10 of 17 | Next
Posted by kitsch on 18th Nov 2013
was very happy to see that OKC was able to bore out the airhole for me right at order. arrived super fast, will definitely be ordering more stuff from you guys. very nice, inexpensive rda. bottom o-ring on deck is thin and would get stuck in the cap every now and then, so i just removed it and now it's fine.
Posted by Mike G on 29th Oct 2013
ordered with 1.6mm airhole option.
so far have built a ribbon wire "tin man" coil, a single 28g micro (2.2Ω), and a over/under single wire dual microcoil (.7Ω). all packing cotton.
easy atty to work in, lots of room, standard #1 phillips screws, stable posts.
this isn't a cloud chaser atty - it is a solid, dependable rda for everyday use. love it.
Posted by Phill on 6th Sep 2013
I was rather happy to give this little dripper a shot.....and I have given it several. Single and doubled 3mm silica, doubled and tripled 1.5mm ekowool, single and doubled 2mm ekowool, coils from 1.5 to 2.8ohm with 30 and 32awg Kanthal. The problem as I see is that the air hole is drilled so low in the cap that even after drilling it out slightly it is partially blocked by the edge of the drip well. I know I can help this by lifting the cap slightly but come on......I should be able to assemble a product as it's intended and have it function properly, not have to modify it to get decent results.
Posted by MartzMimic on 27th Jul 2013
After tiring of leaking tanks and jumping into dripping with a Squid RDA, the folks at OKC Vapes suggested the Igo-L. For $15, this is a great RDA. Like many others, I opened the air hole a bit and the hit is perfect. I was initially disappointed that there weren't holes in the posts to run my wire through, but since I'm now using Ekowool with ribbon wire, it's a moot issue. I've not had any problems with it loosening and slipping off. If you're ready to start dripping, this is a super RDA.
Posted by Unknown on 4th Jul 2013
This is my first rba in my 3 years of vaping and I got it working right by my 3rd try. Good buy
Posted by Bob E on 3rd Jul 2013
Dude, hands down this is the pest performance-to-price ratio ive ever seen. Works everytime! bore the air hole out a bit &
you'll be ordering a couple more. goodTimes
Posted by Vapescape on 24th Jun 2013
I enjoy this one. The air draw is a little free for my tastes, but it works well. I like the lip around the deck to help contain the juice.
It's not my favorite RDA, but it functions well and I continue to use it.
Posted by PQ eCig Reviews on 21st Jun 2013
Built my 1st micro coil, 9 wraps 28g kanthal, tightly wrapped, 1.7 ohms with 3mm silica. Perfect vape, the air hole could be a bit larger but for the $ it is by far the best deal out there. At 14 watts this thing is a cloud factory! Beware of the top cap. It will loosen. I recommend using red O rings for a snugger fit.
Posted by Troy Danielson on 16th Jun 2013
It works great after you drill the air hole out.Lots of vapor and very EZ to use.I would have given more stars if I didn't have to drill the air hole.
Posted by Devon on 6th Jun 2013
Top would come off with the slightest touch. Barely hitting the dripper to one side would tilt the whole lid and make a gap. Lid/top barely has any to no grip onto the base. I could slightly pull up on my dripper and the whole lid would pop off. Reason I see is my o-rings are RED and not BLACK like advertised on the site and everywhere else. When comparing with my friends Igo-l his held very firm and took quite of but of force to take off cap making it sturdier. Also noticed the grooves on the outside of mine were deeper and didn't look as cleanly cut as my friends. So I would advise in making sure if you buy an Igo-l make sure your gonna get it with BLACK o-rings.
Showing reviews 1-10 of 17 | Next