OKC Vapes has teamed up with Chris Creations to bring you the best in rebuildable atomizers. Chris Creations rebuildable atomizers are made of stainless steel, has a dish bowl and allen set screws. It is a superior vaping rebuildable atomizer.
Each V1, V1.5 and V2 Fatty rebuildable atomizer comes with:
1 - Hex key
Wick & wire
V1 - a solid stainless steel body, one hole unit
V1.5 - a plexi-glass style body, one hole unit
V2 - a solid stainless steel body with an adjustable airflow
The V1, V1.5 and V2 models do not come assembled. This is only for the most experienced user as it requires a fair bit of technical aptitude and patience in re-winding the coil around the wick. They are not recommended to be used on an eGo/eGo Twist.
Due to the nature of this product we are unable to provide any type of warranty and are not responsible for any damages to your e-cigarette device that may be sustained from improper use of this product.
All Sales Are Final
RBAs are strictly use at your own risk products.
If there are obvious manufacturer’s defects, please contact us within 24 hours upon receipt of your order.
We will determine the issue and if necessary exchange a new RBA of the same type. RBA cannot be exchanged for another product.
Showing reviews 1-10 of 26 | Next
Posted by CraigW on 19th Aug 2013
Been using the Fatty V2 for about a week. Haven't set it down yet. I love being able to use my old mechanical mods again by twisting low ohm coils. I even get to dilute my juice from 18mg to 15mg because the hit is that good.
I also have an A7 for my Reo Grand bottom feeder and I've used the Phoenix, the Phoenix ended up in the trash due to the center pin issue and the A7 is not too far from the trash once I find a good bottom feeding rebuildable. Hands down, the Fatty V2 is a better RBA in features and durability. It’s easy to rebuild and fine tune the draw. I’m happy with the purchase; so much so I’ll probably buy another Fatty for use with the tank setup.
Posted by Fred Finizzi on 16th Aug 2013
I purchased The fatty after a few months of research. By research I mean I watched a lot of reviews and the clincher for me was Nick at GrimmGreen. It is a high quality build and I can't say anything bad. As with any RBA it takes practice and patience building and installing coils. It looks easy on video and the fatty v2 is considered less difficult to work with but It is tiny when you finally have it physically in your hand. I have purchased a lot of vape supplies online and I no longer get shocked when I receive items in the mail. I have to admit I spent a good solid minute looking inside an empty envelope for ''the rest'' of my fatty. Now this is not a complaint nor do I feel slided by OKCVapes but mounting a coil on this little platform(all rba's are this small)will take patience and practice. Once I finally got a coil mounted and dropped some juice I was the happiest person this side of the nut house. One word...AWESOME!
Posted by benkennedy on 22nd Jul 2013
The first one I got was defective, but OKC Vapes and Chris Creations sent out a new one instantly so kudos on the great customer service. As for the fatty, it performs great. Produces good flavor and rockin big clouds of vaper.
It's a good deal!!
Posted by Emily Elmore on 20th Jul 2013
First off I love the overall looks of this atty. It just looks rite on everything, not to dull and not to shiny. And it's not just pretty it actually performs flawless in everyway! Only thing bad I can say is mine has the slit style hole which is nice but a bit on the constricted side of airflow. No biggy, I just used the trusty dremel and cut the slit a little bigger. It is on the expensive side but I don't mind paying more for something of such quality !
Posted by cat thomas on 10th Jul 2013
it has threads that are alot better than previous ones..and theres no modding required and u wont regret buying this..a must have..i switched to it andi love it!
Posted by Dane on 5th Jul 2013
I'm not new to rebuildables, but this is my first higher end rebuildable dripper. It came with everything pictured in the description. Mine didn't have any burrs anywhere, the threads were very smooth, the airflow control works very well, and it has done everything I expected. It worked awesome on my first build and I like the fact that there's no modding required to get it working.
I wrapped a 4/5 1.5Ω coil over two strands of silica and threw it on my Nzonic V1 and it just works! The flavor, vapor, and throat hit are all very intense and it brought out a lot of nuances in my juice. If you're proficient at building wicks and coils, you'll easily achieve a great vape from this atty.
Absolutely no buyers remorse here! Even if it's a little above your vape budget, it's definitely worth saving up for and adding to your vaping arsenal.
Posted by Matt "BullDog" Silva on 23rd May 2013
Top notch. only complaint is the bottom edge of the deck had burrs all the way around it I had to sand smooth
Posted by VAPE0n on 17th May 2013
I receive the FATTY V2 today.. When I got it i had the hardest time loosening the bolt for the air hole. had to use pliers to make it loose.. The positive post broke after making another setup when I was tightening the bolt it couldn't hold down wire so I tighten it harder then when I did that the bolt damaged the inside of my pro vari connection. The FATTY V2 needs more work very disappointed I don't recommend getting the V2 very expensive and poor quality build.. (FYI) I own different rebuildable tanks I love doing it.. and the V2 is one of the worst tank I bought!!!
Posted by Unknown on 14th May 2013
fatty v2 works great! great flavor and vapor
easy to rebuild
Posted by Unknown on 23rd Apr 2013
The top cap was too loose. Had to change the o rings
Showing reviews 1-10 of 26 | Next